Manchester Steel Resources is an iron smelter and steel mill serving Greater Manchester and the surrounding cities in the North West. This company has enough wealth and experience to work in the steel industry.
The company brings a wealth of knowledge and expertise to your steel project and has built a solid reputation among Northwest builders working on new or renovation projects.
With a wide range of steels for most construction applications, Manchester Steel strives to reduce production times and get painted or fabricated steel to site quickly.
From our modern 20,000 square feet facility, the company has the following quality plant and equipment. You can be confident that Manchester Steel is fully capable of carrying out your project and our in-house quality system ensures on-time delivery and accurate fabrication.
Sterling Fabrication Services has a 20,000 square meter manufacturing and processing facility in Manchester city centre, helping to provide our customers with a reliable source of manufacturing services in Greater Manchester.
Manchester Steel aims to provide the best advice and fast service to customers. Reliable single source supply of manufactured goods. The Manchester facility has a full range of manufacturing equipment for cutting, folding and laser cutting of steel, enabling us to produce almost any product our customers require.
Manchester Steel has got the space and equipment to handle large custom fabrication orders or small scale jobs, so we can offer the highest level of quality service and value for money, regardless of the size of the project.
This company offers different types of steel like beam: it is a structure where two beams are connected together. This arrangement is most commonly seen with larger beams supporting the existing gables of the house, sometimes with load-bearing slabs above supporting the two layers of brickwork on the existing walls, and smaller beams supporting the interior walls. at home.
In most cases, the beams support bricks with a thickness of 100 or 140 mm. A large beam supports the existing wall at the gable end of the house.
Another beam is placed on the stone slab behind the new part of the house, creating an opening for a double or sliding door. Goalposts:
This type of structure is very common when creating openings to increase the size of a room or creating openings for sliding and folding doors.
Horizontal beams will most likely have a 260/300mm wide top plate or a 260/300mm wide bottom plate welded to the beam to support any brickwork above.
Gate beam with internal beam: This construction is often used to create openings in sliding or non-folding doors, where the internal beam meets the beam on the back plate.
This beam supports an existing wall or a wooden joist that supports the floor. Bar steel structure: Steel structures like this are used to form the roof. This type of structure enables you to create rooms on the roof of the building.
Angle steel with supporting posts: frames like this are often used to install doors and windows in the corners of the structure. Beams usually have a bearing plate to support the exterior brickwork of the building.
Dual purpose beam + tensile beam: This structure is usually used to open the rear part. In the house you usually need a target position to support the upper wall, which will be the second target post for the new part of the house.
Makes new doors for double doors or sliding doors etc. The tension beam between the door beams, the support beam, the top floor beam, its new section is for the plug-ins, the gate beams/connecting beams and the interior columns:
This structure is often used to form large openings. For non-folding doors. The beam is usually more than 6 meters. In some cases, the weight and size of large and heavy steel is 1.6 tons.
The inner column should support the connecting beam. Tie beams support the bricks above as the walls drop at ground level to create more space. Make beams.
Many beams and sections are provided as separate items in the house extension. At Manchester Steel Supplies we can usually fabricate and paint split beams within 24-48 hours. Some beams require a top loading plate to support the two brick shells against strong impact. Double beams are connected to support two brick shells.
Transoms with bearing plates are usually installed on double doors. The panels support the new bricks above the doors. Corner connection: Corner clamps are used to screw one beam to the side of another beam.
Flanged connection: usually used for beams that cannot bear heavy loads. In most cases, standard fittings use a maximum of three screws. Base plates: Add base plates to beams to support brick or wood joists.
The base plate is welded to the beams to support the brickwork. Usually, such beams are not used for folding doors. Top Slabs: Adds top slabs to the beams to support the brickwork.
The top plate is welded to the center of the beam and supports two brick shells. This type of beam is often used to knock existing exterior walls into wider parts of the house. 300 mm or 250 mm wide boards are usually double beams 8 or 10 mm thick:
Used when there is a height restriction, design if the steel is in a location where it cannot be lifted or raised mechanically, have the fabricator assist in installing the joist.
When installing reinforcement, reduce the weight of the beam by 50%. These steels are bolted together to support the 2 brick shells.
Typically, the overall size of the steel from toe to toe is 300mm. Holes are usually drilled on 500/600 centers. Butt joints: Butt joints are required when the beam is too long or heavy to install
The flange plate must be at least as thick as the beam flange, and in some cases, the steel web is stiffened by the load on the beam. In some cases, HSFG fixation is required.
These bolts are expensive and you may need equipment to properly tighten the joint. It is best to ask a structural engineer to change this connection to 8.8 grade bolts or ask if the riser can be welded in place after installation.
Please contact such communications. End plate connection: This connection is usually used when the load on the beam is reduced on the surface. Fittings are often used for steel making. This connection is usually done only at the third point.
Result
All the information mentioned above is provided to buyers who want to know and buy metal steel products with professional and innovative thinking.
And don’t hesitate to ask any questions, our support teams are available. For more information, please visit our website.
