What is a spade and is there a difference between a spade and a bullion? This question is an introduction to curiosity about the product and to try to learn about it.
We will consider this in the article Ingot Type. In this paper, the differences between ingot, bilt, bloom and slab are investigated.
In Lyman, ingots, blossoms, and tablets are all made of ingots, but differ in many ways. These products are semi-finished steel that need processing to become finished products.
Due to the importance of these products in the production and price of rebar and others, it is necessary to obtain the information about the type and specifications of these products. Below, we will introduce the product of billet and the difference between ingot and ingot, slab and blossom.
What is ingot? If it is produced directly from ccm to rolling consumption, it is called ingot or ccm ingot. Also called Shamshell, billet is longer than billet, has a round or square surface and less than 15 cm wide.
The area of the billet is less than 230 square centimeters, and is often used for producing rebar and wire. Various types of billets are made, including ۳sp and ۵sp.
A more elastic and flexible billet to stretch, bend and twist is a ۳sp billet. 5sp shovel is not flexible and is used where structure is not under pressure or force.
۳SP tickets are more expensive. 5SP BILLET is mainly used for reproduction, and ۳SP grades are used for beams and angles.
The difference between the ingot and the ingot mentioned previously is the empty longer than the empty, with a round or square surface less than 15 cm.
In fact, ingots of 100, 120, 125, 130, 150, 160 are called ingots of 180×180, 200×200, 250×250 are called bubbles and are used to produce industrial steel rods.
The importance of carbon in steel ingots has a special place as steel bars are used to produce steel bars, and carbon content in steel ingots is important for the production of steel bars.
If we’re rebuilding 14 to 40, the excavator should use 30 to 35 carbon, for smaller sizes, less carbon is needed because smaller sizes require more elasticity and softness.
Ingots 125, 130 and 150 are suitable for reproduction, and in modern and up-to-date plants, rebar can be produced from both types of ingots. Among other differences between the two products, the ingots make it easier to transport them from the ingots due to their size.
One important point about the price of ingots is that the bullion prices are initially set by Khuzestan’s steel bars daily.
However, due to the difficulties created by this process, including the fact that this group is a public institution, and the lack of transparency in the price of a unit, it was decided that the ingot pricing standard should be a private manufacturer. like steel diggers, iron arfa, and iron pasargad.
The difference between ingots and flowers, as we have said, is called ingots of size 100, 120, 125, 130, 150, 160 and ingots of size 180×180, 200×200, 250×250 bloom. Bloom is also known as “the sun”.
The difference between a fin and a blossom is that the blossom is the same ingot, but in a different size. That is, it is more than 15 cm wide, in other words it is less than 230 square centimeters square, usually consisting of bloom and half-bodies.
Blum is often used for building rails, shields, plasters and cans. Bloom was used more frequently in the past, but as time passed, businesses in the industry named the “product fabric”.
Although the older people in this market still call this product Bloom. The most important cities in Iran are Iron City, Khuzestan Steel Complex, Pasargad Steel and Iron Complex, Iron & Steel Complex, Hamedan Iron & Steel Complex.
It is sold in sizes greater than 160 x 160 mm and in length 6 and 12 meters. The difference between Ingot and Plate Slabs is a rectangular cube made of steel, unlike billets and crystals, usually 230 mm thick, 1.25 m wide and 12 m long.
In fact, the difference between slab, billet, and bloom in the cross section and its final size is. Dahl is also known as Tatal. The slab is a raw material for making steel plates.
It’s important to cut the blossom from the edge of the rock, so it’s one of the many differences between a blossom and the slab in size. The main manufacturer of blade is the steel of Khuzestan, which produces and sells the product in the thickness of 180-300 mm.
Conclusion
All the above information about providing customers who want to know and buy metal steel products and with professional and innovative thoughts, passionate and enthusiastic attitudes.
Our vision is to be the standard for customized products and quality services so that we can create a good brand image of our company in the national and international market with competitive price and cheap transportation services.
We are eager to do what we do and strive to meet the needs of our customers by providing quality products and services. And don’t hesitate to question our support team. For more information please visit our site.
